Televes 769501, User Manual

Page: 135 / 196

EN
135
Figure 5-166: Device Info, Voice- Registered Sip Accounts information and Status
Figure 5-167 provides a configuration example for the SIP provider parameters (Basic Settings)
In order to configure Service Provider, Figure 5-167:
STEP 1.
Select the Local from the selection combo box, Figure 5-168;
This will change service provider parameters dependent on local specific applicable standards, such as Ring tone,
Change of local to take effect will require the SIP client to be stopped and then restarted.
STEP 2. Type in Voice Dialpan;
STEP 3.
To Use SIP Proxy select the corresponding checkbox;
STEP 4. If Use SIP Proxy selected configure SIP proxy to use by entering:
SIP Proxy
SIP Proxy Port
STEP 5. To Use SIP Outbound Proxy select the corresponding checkbox;
STEP 6.
If Use SIP Outbound Proxy selected configure SIP Outbound Proxy to use by entering:
SIP Outbound Proxy
SIP Outbound Proxy Port
STEP 7. To Use SIP Registrar select the corresponding checkbox;
STEP 8.
If Use SIP Registrar selected configure SIP Registrar to use by entering:
SIP Registrar
SIP Registrar Port
Configure two SIP accounts “0” and “1”, at the SIP account table:
STEP 9.
Enable the accounts by selecting the respective Enable Account checkbox;
STEP 10. Type in for each account the extension number;
STEP 11. Type in for each account the account display name;
STEP 12.
Type in for each account the account authentication name;
STEP 13. Type in for each account the account password;
STEP 14.
Select for each account the Physical Terminal Assignment, i.e., the FXS port to use, by using the FXS ports checkboxes;
STEP 15. Select the account Preferred time value at the respective selection combo box;