Televes 769501, User Manual

Page: 105 / 196

EN
105
5.6.8.1 Default Gateway
Selection of Advanced Setup submenu Routing, item Default Gateway will display a Routing-Default Gateway configuration window, Figure 5-120.
A short on line help text is provided in the configuration window.
The Routing Default Gateway configuration window presents two lists:
Selected Default Gateway Interfaces: the WAN interfaces that can be used as default gateway interfaces are listed here; only one
interface will be used as default gateway interface- this interface will be the highest priority interface of the connected WAN in-
terfaces in this list;
WAN interface priority is based on its position on the list, the first one of the list being the highest priority interface.
To change WAN interface priority, its position in the list must be changed; that can be achieved by removing all from the Se-
lected Default Gateway Interfaces list and adding them back in the desired order.
Available Routed WAN Interfaces: all defined available routed WAN interfaces are listed here; these interfaces can be moved to the
Selected Default Gateway interfaces list
If there is only one WAN interface defined in the system, as in the example presented, this will be selected by the system as the default gateway
interface thus being presented is the selected default gateway list on the left.´
If more WAN interfaces are shown in the list on the right (available routed WAN interfaces) one or more can moved to the list on the left and be
selectable as default gateway routed interface according to its priority in the list.
Figure 5-120: Advanced Setup, Routing-Default Gateway Configuration window
Use the Select WAN Interface selection combo box Figure 5-120, to choose a preferred wan interface as the System default IPv6 gateway.
To finalize the configuration use the Apply/Save button.