EN
185
7.2.13 “statistics” node
This node allows the user to view and reset the current WAN/LAN/optical statistics on the device.
The –option argument is a mandatory argument to all the commands in this tree and is used to select the type of packets to show, Received,
Transmitted or all. The following argument values can be used: <received|transmitted|all>.
+ statistics[]
+ lan[@reset, @show]
+ optical[@reset, @show]
+ wan[@reset, @show]
Figure 7-13: statistics node tree
7.2.13.1 Permissions
Command
Admin
Support
User
/statistics/lan/reset
Yes
Yes
Yes
/statistics/lan/show
Yes
Yes
Yes
/statistics/optical/reset
Yes
Yes
Yes
/statistics/optical/show
Yes
Yes
Yes
/statistics/wan/reset
Yes
Yes
Yes
/statistics/wan/show
Yes
Yes
Yes
Table 7-53: Statistics node and sub-node tree command permissions
7.2.14 “dhcp” node
A DHCP-enabled client obtains a lease for an IP address from a DHCP server. Before the lease expires, the DHCP server must renew the lease for the
client or the client must obtain a new lease. This node shows the DHCP leases table.
+ dhcp[@show]
Figure 7-14: dhcp node tree
7.2.14.1 Permissions
Command
Admin
Support
User
/dhcp/show
Yes
Yes
Yes
Table 7-54: dhcp node command permissions
Summary of Contents for 769501
