Televes 769501, User Manual

Page: 169 / 196

EN
169
7.2.3.4.2 “remove” command
Name remove
Description Removes an existing entry on the port triggering list
Full path /nat/port-triggering/remove
Arguments
<MANDATORY>
--open-port-end Open port end
--open-port-start Open port start
--open-proto Open Protocol <TCP/UDP|TCP|UDP>
--trigger-port-end Trigger port end
--trigger-port-start Trigger port start
--trigger-proto Trigger Protocol <TCP/UDP|TCP|UDP>
--wan-intf Interface
Table 7-22: “remove” command information
7.2.3.5 “virtual-servers” sub-node
Virtual Server allows you to direct incoming traffic from WAN side (identified by Protocol and External port) to the Internal server with private IP
address on the LAN side. The Internal port is required only if the external port needs to be converted to a different port number used by the server
on the LAN side.
7.2.3.5.1 “create” command
Name create
Description Creates a new entry on the Virtual-Servers list
Full path /nat/virtual-servers/create
Arguments
<MANDATORY>
--ext-port-end External port end
--ext-port-start External port start
--int-port-start Internal port start
--protocol Protocol <TCP/UDP|TCP|UDP>
--server-ip Server IP address
--server-name Service Name
--wan-intf Interface
[OPTIONAL]
--int-port-end Internal port end
(if not set it will have the same value as External Port End)
Table 7-23: “create” command information