Televes 769501, User Manual

Page: 70 / 196

70
GPON ONT
5.6.2.3.1 GRE Tunnel Setting – Basic Configuration Mode
In the basic configuration mode only Tunnel Name and Remote IP are required for setting the GRE Tunnel, Figure 5-56. Remote IP is the Public
IP address of the routing device terminating the GRE Tunnel in the other extreme of the tunnel (Refs. 769501-769502 of network B in the shown
example), Figure 5-53.
Figure 5-56: WAN Service setup window - GRE Tunneling Settings – Basic configuration mode
After entering the required information, use Next button to progress to the next window, WAN Service setup window- GRE Tunneling Settings –
GRE Summary, Figure 5-57. This table should reflect the configuration for the GRE-Tunnel service setup parameters than have been configured.
Please verify the presented configuration match the settings provided by the ISP for this service.
Figure 5-57: WAN Service setup window- GRE Tunneling Settings – GRE Summary
To finalize the configuration use the Save/Apply button, Figure 5-57. The next displayed window is initial window, the WAN Service Window, where
the service configured is displayed in the corresponding table, Figure 5-58.