Televes 769501, User Manual

Page: 57 / 196

EN
57
Figure 5-33: WAN Service setup - Routing Default Gateway configuration window
After default gateway interface configuration, use the Next button, Figure 5-33, to progress to the next WAN Service setup – DNS Server configu-
ration parameters window, Figure 5-34.
5.6.2.1.5 DNS Server Configuration
DNS server interface can
either be selected from available WAN interfaces, Figure 5-34, 1, from the list Selected DNS Server Interfaces, according to its priority
(please see description bellow),
or use a Static DNS IP address, in which case this option must be selected, Figure 5-34, 2, and the Static DNS servers (primary and
secondary) IP addresses must be entered.
5.6.2.1.5.1 Selection of DNS Server Interfaces from Available WAN Iinterfaces
The DNS Server Configuration window presents two lists:
Selected DNS Server Interfaces: the WAN interfaces that can used as system DNS Server interfaces are listed here; only one interface
will be used as DNS server interface- this interface will be the highest priority interface of the connected WAN interfaces in this list;
WAN interface priority is based on its position on the list, the first one of the list being the highest priority interface.
To change WAN interface priority, its position in the list must be changed; that can be achieved by removing all from the
Selected DNS Server Interfaces list and adding them back in the desired order.