Televes 769501, User Manual

Page: 107 / 196

EN
107
Figure 5-123: Advanced Setup, Static Routing-Configuration window- Current configuration
5.6.8.3 BGP
Selection of Advanced Setup submenu Routing, item BGP will display a Routing-BGP configuration window, Figure 5-124. This window allows the
configuration of the:
BGP router,
Neighbors,
Networks.
A short on line help text is provided in the configuration window.
To be able to configure the BGP router you must have the following information on the router parameters:
Autonomous System Number (Number: 0 to 65535)
Router ID (Optional) - IP address of one of the router interfaces
In order to configure the BGP Router, Figure 5-124:
STEP 1.
Select the Enable BGP option;
STEP 2. Type in the Autonomous System Number;
STEP 3.
Type in the Router ID (optional)
To finalize the BGP Router configuration use the Apply/Save button.
In order to configure the Neighbors, at the neighbors configuration table, Figure 5-124:
STEP 1. Type in the Neighbor IP address;
STEP 2.
Type in the Neighbor Autonomous System (the Remote AS column);
STEP 3. Use the Add Entry button; a new line will be added to the table under the entered neighbor configuration.
To finalize the Neighbor configurations use the Add Entry button; the neighbor just configured is now shown at the table and a new line is added.
If the configured Neighbor is announcing BGP routes, these are added to the system and can be viewed at the Device Info menu, item Route
window, Figure 5-125.