Telestream PRISM MPI, User Manual

Page: 99 / 304

Configure the Instrument
Configure and Select Signal Inputs
99
PRISM MPI-MPX User Manual
To monitor general purpose RTP streams:
1. Select RTP .
2. In SFP Port select the port being monitored.
3.
Enter Source and Destination information.
4. Set the RTP Payload Type between 0 to 127.
5.
Select the Video Format and corresponding Frame Rate.
6.
Select
Save
and close the menu.
7.
To begin monitoring this input, select the configured input. (See Select Input .)
Select Input
To select a configured input:
1.
Select the
Input
icon ( ) from the Status bar at the bottom of the PRISM monitor.
2. Select a configured input from the list in the bottom bar.
3.
Select the
Home
icon ( ) to close the Input selection controls.