Telestream PRISM MPI, User Manual

Page: 210 / 304

Application Information
IP Session Application
PRISM MPI-MPX User Manual
210
IP Session Application
The IP Session application uses several tabs to display status of various IP stream
parameters. Select any of the tab titles to view the associated information: Layer 1/2,
Video, Audio, Data, PTP, or NMOS.
Note:
Option MP2-IP-MEAS must be installed to use the IP Session application. The
display shows only Path 1 unless you enable ST2022-7 Seamless Switching (see
Configure Instrument for HDR/WCG Monitoring
). There is a difference between “Port”
and “Path”. The Port is the physical SFP port that is used to input the IP signal. Path 1
and Path 2 are the signal paths to be used for seamless switching. This differentiation
is being made since it is possible for both Path 1 and Path 2 to use a single Port.
Elements of the IP Session Header
The elements at the top of the IP Session application are shared between several tabs: