Telestream PRISM MPI, User Manual

Page: 109 / 304

Configure the Instrument
Configure Instrument Outputs
109
PRISM MPI-MPX User Manual
Configure Instrument Outputs
PRISM allows you to set the SDI OUT connector to Loop-through or Generator.
To change the SDI output
1. Select the Settings icon ( ) to open the Settings menu.
2.
Select
Outputs
to open the Outputs submenu.
3. Set the SDI output to Loop-through or Generator.
4.
Close the Outputs menu.
SDI OUTPUT loop-through of IP inputs is available for SDI, ST2022-6, and ST2110-20/30
(see
Configure the Audio (2110-30) stream tab:
for audio configuration details) including
embedded audio streams.
See the SDI Generator applications for instructions on how to configure the SDI
Generator signal.