Telestream PRISM MPI, User Manual

Page: 126 / 304

Configure the Instrument
Set and Recall Instrument Presets
PRISM MPI-MPX User Manual
126
2.
Select the arrows to change the threshold settings.
Depending on the alarm, there could be from one up to four thresholds.
Group alarm titles (bold), related alarms, and the related-alarms descriptions
ANC Session
SCTE104 Message Received: An SCTE104 packet has been received as seen on the ANC Session
application.
Audio
•
Audio Over Error: Signal is at or above the specified Over level for a time longer than the duration
setting.
•
Audio Pair Out of Phase: Currently selected channels displayed in Lissajous have the channel
correlation at or below the specified percentage for a time longer than the duration setting.
•
Audio Signal Lost: No Audio is present in the currently active signal.
CC (Closed Captions) / Subtitles
•
CEA708 Closed Captions Lost: No valid CEA708 closed caption packets in the ancillary data space
were found.
•
OP-47 Multipacket Teletext Lost: No valid Operational Practice 47 multi data packets were found
in the ancillary data space of the signal.
•
OP-47 SDP Teletext Lost: No valid Operational Practice 47 SDP data packets were found in the
ancillary data space of the signal.
•
S334-1 CEA 608 Closed Captions Lost: No valid S334-1 CEA 608 closed caption packets were found
in the ancillary data space.
•
S334-2 CEA 608 Closed Captions Lost: No valid S334-2 CEA 608 closed caption packets were found
in the ancillary data space.
•
SMPTE 2031 Teletext Lost: No valid SMPTE 2031 ANC data packets were found in the ancillary data
space.