Configure the Instrument
Adjust Loudness Display
105
PRISM MPI-MPX User Manual
1
Dialogue Intelligence enabled
Note:
The dialogue intelligence algorithm in PRISM introduces a latency of 2.048s in
the effective measurement of the short-term and infinite Loudness. Other Loudness
measurement parameters are not affected by the latency.
Note:
The Loudness measurements are updated every 500ms in the user interface.
Note:
Maximum short-term Loudness level can be considered as an alternative to
using Loudness range for short audio clips.
Change the Channels the Loudness Meter Measures
Select the correct program labels at the bottom of the level bars (green letters mean it
is selected) and the Loudness meter measures the levels based on that audio program.
Note:
Changing the selected Audio program that the Loudness meter measures
changes the headphones or speaker pair, and changing the headphones or speaker
Short-Term
Gating Window
EBU R128(3s),
Legacy(10s)
Duration of the sliding windows for short-
term loudness measurement
Full-Scale Units
LKFS or LUFS
Region specific selection; has no effect on
measurement
TRUE PEAK DC
Block and
Emphasis Filter
Enable or Disable
DC block simulates the effect of
downstream devices that remove DC.
The emphasis filter compensates for
dispersion effects from Nyquist filters in the
broadcast chain that make it difficult to
measure and control the peak levels of
high
‐
frequency signals.
Configuration Parameters for Loudness Display
Summary of Contents for PRISM MPI
