Telestream PRISM MPI User Manual Download Page 48

Page: 48 / 304

Getting Started

Activity Center

PRISM MPI-MPX User Manual

Activity Center

The Activity center tracks messages and devices in the PRISM. For example, you can

view messages that allow you to eject devices mounted to the instrument. These steps

explain how to eject a USB drive from the instrument using the Activity center.

A number above the Activity icon indicates the number of messages waiting in and

devices connected to the instrument.

[

Select the Activity icon to view the DASHBOARD messages, which includes devices

connected to the instrument.

Note:

After inserting a USB drive, it must be unmounted through the Activity icon

before removing it from the instrument.

Select the Eject icon ( ) to unmount the USB drive from the instrument.

Note:

If there is no USB drive in the instrument, the Eject USB Drive text and eject icon

do not appear.

Select the Activity icon ( ) again to close the window.

Summary of Contents for PRISM MPI

















































































































































































































































































































Search results

Summary of Contents for PRISM MPI

Reviews:

Brands by name

Popular brands

Telestream PRISM MPI, User Manual

Search results

Summary of Contents for PRISM MPI

Reviews:

Brands by name

Popular brands