Telestream PRISM MPI, User Manual

Page: 98 / 304

Configure the Instrument
Configure and Select Signal Inputs
PRISM MPI-MPX User Manual
98
2.
Configure the Data (2110-40) stream tab:
a. Select the Data tab.
b.
Move the Enable Data slider to
Enabled
to begin configuration.
c.
Enter the information in SFP Port, Source Addr, Source Port, Destination Addr.,
and Destination Port for each data stream.
d.
Set the RTP Payload Type between 96 and 127.
Note:
The RTP Payload Type number must be unique for each IP stream. The RTP
Payload Type is displayed in the IP Status application.
e.
Select
Save
and close the menu.
3.
To begin monitoring this input, select the configured input. (See Select Input .)
Configure RTP
Monitoring general purpose RTP streams allows you to see physical and IP layer
measurements, but none of the video, audio, and data payload is decoded and
displayed.