Telestream PRISM MPI, User Manual

Page: 164 / 304

Application Information
Vector Application
PRISM MPI-MPX User Manual
164
Bar Targets
Select between 75% or 100% scaling.
IQ Axis
Select this to turn the IQ Axis On or Off.
Gain
Select one of the trace vector magnifications: x1, x2, x5 or x10.
Convert to Rec. 709
Turn this setting On to allow the trace displays to convert the Gamma and Color Gamut
settings for the signal to SDR Narrow and BT. 709 (requires Option MP2-PROD).
Note:
Set Convert to Rec. 709 to On to automatically convert settings to BT.709,
otherwise the graticule selection must be manually changed. (See
Configure
Instrument for HDR/WCG Monitoring
.) Convert to Rec. 709 mode is not supported for
SD signals.
Line Select
Line Select allows you to choose the picture lines to monitor in the display. Either All
Lines or 1 Line can be selected.
If 1 Line is selected then the display only shows results for the selected line in the
picture. The line can be selected using the on-screen tools; see Line Select Function . Or
the line can be selected directly on the Picture.
Vector Application On-screen Tools
You can change the gain, horizontal position, vertical position, and bar targets without
opening the Vector settings menu through on-screen tools. Select the tool/button for
the setting you want to adjust. All the available tools are located on the top and bottom