Telestream PRISM MPI, User Manual

Page: 183 / 304

Application Information
Picture Application
183
PRISM MPI-MPX User Manual
3.
Select the
Tile
icon ( ).
Convert to Rec. 709
Set to
On
to allow the trace displays to convert camera logs to Rec. 709 (requires Option
MP2-PROD).
Note: Convert to Rec. 709 mode is not supported for SD signals. In full screen mode,
there is no cropping. Pictures are decimated horizontally or vertically to obtain the
correct aspect ratio. This decimation may cause some artifacts.
Format Overlay
Set to On to display the format information on top of the picture. Select and drag the
format information window to set the location.
Source ID Overlay
Provides an overlay of the video source on the Picture application. The source data
carries ANC data conforming to SMPTE 291M. The default DID is 0x53 and SDID is 0x49.
Set them as required. The source ID is limited to a maximum 15 ASCII characters.
To enable the Source ID Overlay, open the Picture Setting menu and then set the
Source ID Overlay to On . Select and drag the overlay to the correct location on the
application.