Telestream PRISM MPI, User Manual

Page: 227 / 304

Application Information
IP Graphs Application
227
PRISM MPI-MPX User Manual
Audio
Select the drop-down menu to select a stream to monitor. The monitored stream is
noted in the IP Graphs header, next to the Stream type button.
Elements in IP Graphs Application Display
The elements at the top of the IP Graphs application are shared between all graphs.
Note: Only Path 1 displays unless you enable ST2022-7 Seamless Switching, (see
Configure Instrument for HDR/WCG Monitoring
).
•
PATH 1 and PATH 2: The description of the two information paths.
•
Port: Shows the physical port used on the instrument.
•
Src: Lists the source address of the IP stream.
•
Dest: Lists the destination address of the IP stream.
•
Protocol: Lists the protocol being used by the monitored stream.
•
PRS: Shows the Packet Read Schedule (PRS) defined in the input video settings.
•
Clear icon: Select the Clear icon ( ) to reset the monitoring session.
•
Stream type: Select this button to change to Video, Audio, or Data stream IP graphs.
•
Path: Select the Path button to change to Path 1, Path 2, or both Path 1 and 2.
•
Res: Lists the resolution of the graph display at the bottom right of the graph.