Teledyne TSIO-360-RB, Maintenance Manual

Page: 76 / 206

9-2
9-1 GENERAL
To facilitate and insure proper reinstallation, tag or mark all parts and hardware as they
are removed or disassembled.
Tag any unserviceable parts or units for investigation and possible repair. Take extreme
care to prevent foreign matter, lockwire, nuts, washers, dirt, etc., from entering the engine
on or off the aircraft. Make use of protective caps, plugs and covers to insure openings
are unexposed.
WARNING
Dust caps used to protect open lines must be installed OVER the tube ends and
NOT IN the tube ends. Flow through the lines will be blocked if lines are
inadvertently installed with the dust caps in the tube ends.
If anything is dropped into the engine work must be stopped immediately and the item
removed.
Insure all parts are thoroughly cleaned, properly protected from dust and corrosion and
properly stored until assembly .
Make sure replacement nonmetallic and metallic parts show no sign of storage
deterioration. Parts exceeding specified shelf life limitations must not be used.