Revision 7.10
2/28/2012
599.09 00090003.mlg LOG FILE CLOSED
Enumerating and selecting files
About to send 3 files
Prechecking is not necessary for this invocation
599.31 save_and_change_sensors()....
Changed c_science_on from 1 to 0
599.34 save_and_change_sensors()....
Changed c_iridium_on from 0 to 0
Changed c_profile_on from 1 to 1
Changed c_gps_on from 1 to 1
Changed c_argos_on from 1 to 1
Changed c_att_time from 1 to 1
Changed c_pressure_time from 0 to 1
Changed c_iridium_time_til_callback from 0 to 0
Changed u_pinger_rep_rate from 8 to 0
Waiting for glider attached ctd to idle
Waiting for motors idle
Enabling hardware handshake on output
START
**B00000000000000
Š607.61 restore_sensors()....
Restored c_science_on from 0 to 1
607.63 restore_sensors()....
Restored c_iridium_on from 0 to 0
Restored c_profile_on from 1 to 1
Restored c_gps_on from 1 to 1
Restored c_argos_on from 1 to 1
Restored c_att_time from 1 to 1
Restored c_pressure_time from 1 to 0
Restored c_iridium_time_til_callback from 0 to 0
Restored u_pinger_rep_rate from 0 to 8
607.71 restore_sensors()....
SHUFFLING FILES...
Sent 3 file(s):
c:\logs\00090003.SBD c:\logs\00090002.SBD c:\logs\00090001.SBD
SUCCESS
630.30 00090004.mlg LOG FILE OPENED
630.60 behavior surface_2: SUBSTATE 7 >7 : After data transmission, waiting for controlC to
exit/resume
Page 188 of 228