Revision 7.10
2/28/2012
entering the following shell command where <to address> is replaced by a user’s email
address.
mail <to address>
3. At the “Subject:” prompt, enter the email’s subject line followed by a return key.
4. Enter a controlD.
5. At the “Cc:” prompt, enter the return key. The mail application terminates and a shell
prompt appears.
6. Log on as user “root” by entering the following shell command. Refer to Appendix D for
the factory delivered root password.
su
7. Examine the “maillog” file by entering the following shell command.
less /var/log/maillog
8. Move to the end of the maillog file by entering the “End” key. If a log entry appears
showing that the email authored in step 2 was accepted for delivery, then the email
system is working. Thus, the Dock Server Application is failing to send the expected
glider notification email.
Verify that the steps to receive glider email event notifications have been followed (refer
to the beginning of this section). After verification, if email problems persist, then report
them to [email protected].
9. When finished viewing maillog, enter a “q” to return to a shell prompt. Enter an “exit” to
end the session as user root. Finally, enter a second “exit” to close the shell window.
4.6 Advanced File Transfer to a Glider – dockzr Command
This section details the dockzr command features. This command transfers files from
the Dock Server machine to a glider using the zmodem protocol. The dockzr command
syntax follows.
Page 60 of 228
