Revision 7.10
2/28/2012
Figure 615. Script Action Dialog.
The selected script will now automatically start when instructing a glider to follow a route
using the Routes/Execute Route menu option.
6.9.3 Setting .ma file names
The predefined mission glmpc.mi explicitly looks for a file named goto_l10.ma to
retrieve waypoints for the glider to follow. However, any .ma file name could be used to
instruct a glider to follow a particular route, as long as the mission being run looked for
the correct .ma file, and the .ma file described the desired waypoints. For this reason,
Glmpc Terminal allows variations on the .ma file name generated when executing a
route, as long as the name takes the form goto_l<N>.ma where N is as integer.
To change the .ma file name generated by Glmpc Terminal, use the following steps.
1.
Select Missions/Set .ma file name. A dialog will then appear requesting the
required .ma file name.
2.
Enter a file name of the form goto_l<N>.ma (e.g. goto_l14.ma) and select ‘OK’.
Page 95 of 228
