Revision 7.10
2/28/2012
Figure 66. FTP Site Login Dialog.
Any maps already stored on the local file system can be loaded into Glmpc Terminal, as
long as the maps adhere to the format outlined in Appendix G. Local maps are loaded
using the following steps:
1.
Select Maps/Load map from…/Local file system, from the Glmpc Terminal’s menu bar.
A Select map directory dialog (similar to that shown in Figure 67) will appear.
2.
Use the dialog to choose a map directory on the local file system. Note that the map
directory must contain a coordinates.xml file (and would usually contain an image.JPG
file showing the map to be displayed).
3.
Select the chosen map directory. A warning dialog will result if the map directory does
not contain a coordinates.xml file, otherwise, the map will be loaded and displayed.
Page 82 of 228
