Revision 7.10
2/28/2012
5. Select the “Hosts” tab. Select the one host entry in the table and delete it by clicking the
“Delete” button.
Figure 13 shows the one host entry selected. Note, the host entry shown in this figure
may not match the one in your Network Configuration dialog.
6. Create a new host entry by clicking the “New”
button. In the hosts entry dialog (Figure 14), enter
the information collected in step 1. Use the fixed IP
address as the “Address”, the fully qualified domain
name as the “Hostname”, and the hostname as the
“Aliases”. Click the OK button.
7. Select the “DNS” tab on the Network Configuration
dialog. Enter the following information collected in
step 1. Figure 15 shows the “DNS” tab with
example information entered.
a) The fully qualified domain name as the “Hostname”.
b) The primary DNS IP address as the “Primary DNS”.
c) The secondary DNS IP address (if one) as the “Secondary DNS”.
d) The domain name as the “DNS search path”.
Page 12 of 228
Figure 14. New Hosts Entry Dialog.
