Revision 7.10
2/28/2012
burnGlider.xml
Burns a glider app into Persistor flash memory. Preferably the Glider would be in
GliderDos or PicoDos before running this script. However, it should be able to deal with
being in a mission; the mission and sequence will be aborted.
The glider.app file must be in the glider’s “toglider” directory before starting this script.
This script leaves the Glider in GliderDos in lab mode. If an error occurs, it leaves the
Glider in PicoDos with a warning string.
When this script stops, verify that the app version you expect was installed by
examining the output of the last "ver" command issued by the script.
burnScience.xml
For burning a science app into Persistor flash memory. Preferably the Glider would be
in GliderDos or PicoDos beforerunning this script. However, it should be able to deal
with being in a mission; the mission and sequence will be aborted.
The supersci.app file must be in the glider’s “toglider” directory before starting this
script.
IMPORTANT NOTE: Once consci is run from PicoDos, the only exit is via dropping the
CD signal on the console serial port. This cannot be accomplished (yet) by Dock
Server. Therefore, this script leaves the Glider stuck in consci. The operator will need
to drop CD to exit. After that, he will be in PicoDos, but the Persistor boot switch
remains set the same as on entry (presumably boot app). So just typing "app" will be
sufficient to complete the process and return the glider to operation.
After this script finishes running, issue a "ver" command and from the version of the
science app you can judge whether it succeeded.
dbdmlgToDock.xml
Each time a glider comes to the surface during a mission, this script transfers up to the
latest 30 files of type DBD and MLG to the Dock Server. Once the files are transferred
the script directs the glider to resume its mission.
Page 194 of 228
