Revision 7.10
2/28/2012
A shell window opens that shows the Data Server application’s process information
(Figure 71). This information confirms that the application is running. However, for the
same reason as Dock Server, do not start more than one instance of the Data Server
application at any time.
Figure 71. Shell window confirming that Data Server is running.
3. Type the enter key to close the shell window.
To start the Data Server application remotely, complete the following steps:
1. Log on to the Data Server machine as user “localuser”. The factory delivered password
for this account is “WideOpen” (see Appendix D).
2. Go to directory /opt/localuser/bin
3. Type ./startdataserver followed by the the enter key.
7.2 Checking that Data Server is Running
To check that the Data Server application is running, complete the following steps:
1. Log on to the Data Server machine as user “localuser”. The factory delivered password
for this account is “WideOpen” (see Appendix D).
2. Double click the desktop icon labeled “seedataserver”.
Page 100 of 228
Data Server processing information
