Tektronix RFM150, Instruction Manual

Page: 107 / 278

Reference
RFM 150 Instruction Manual 3–13
Power Up / Power Down Modes
You can configure the power up and power down modes of the
RFM 150.
Power up mode. The RFM 150 can be set to power up in any of the 10
measurement modes, or in the last measurement mode that was used
before power down. When auto power down is enabled, LAST is
useful because the instrument will power up in the same mode.
Auto power down.
If this feature is enabled, the instrument powers
down after 10 minutes with no activity, to preserve battery life.
Changing the modes.
Press UTIL, then select CONFIG followed by
PWR UP/DN. The power up / down parameters are displayed
(Figure 3–5).
Function keys select
field to be edited
POWER UP / DOWN MENU
POWER UP MODE:
PWR UP
MODE
"
LAST 1 CHAN PILOTS 5 CHAN
ALL CHAN METER C/N HUM
FM DEV SWEEP SPECTRUM
AUTO POWER DOWN:
ENABLE DISABLE
AUTO
PWR DN
Arrow cursor and
highlighted label indicate
the field being edited.
Figure 3–5: The power up / down menu
Press F1 or F2 to select the field, then turn the knob to change the
setting. The outline cursor moves to the new setting.
Exit.
Press ESC to exit the menu, one level at a time. The new
settings will be saved.
Reference
RFM 150 Instruction Manual 3–13
Power Up / Power Down Modes
You can configure the power up and power down modes of the
RFM 150.
Power up mode. The RFM 150 can be set to power up in any of the 10
measurement modes, or in the last measurement mode that was used
before power down. When auto power down is enabled, LAST is
useful because the instrument will power up in the same mode.
Auto power down.
If this feature is enabled, the instrument powers
down after 10 minutes with no activity, to preserve battery life.
Changing the modes.
Press UTIL, then select CONFIG followed by
PWR UP/DN. The power up / down parameters are displayed
(Figure 3–5).
Function keys select
field to be edited
POWER UP / DOWN MENU
POWER UP MODE:
PWR UP
MODE
"
LAST 1 CHAN PILOTS 5 CHAN
ALL CHAN METER C/N HUM
FM DEV SWEEP SPECTRUM
AUTO POWER DOWN:
ENABLE DISABLE
AUTO
PWR DN
Arrow cursor and
highlighted label indicate
the field being edited.
Figure 3–5: The power up / down menu
Press F1 or F2 to select the field, then turn the knob to change the
setting. The outline cursor moves to the new setting.
Exit.
Press ESC to exit the menu, one level at a time. The new
settings will be saved.