Tektronix RFM150, Instruction Manual

Page: 199 / 278

RFM 150 Instruction Manual A–1
Appendix A: Channel Tables
The RFM 150 contains eleven fixed channel tables, which can be
edited, but cannot be deleted. The four fields that can be edited
through the RFM 150 menus are: skip (yes/no), scrambled (yes/no),
dwell time (short or long) and amplitude offset (in dB). The
companion CSS150 package allows editing of additional fields, as
well as the creation of custom channel tables. Fixed tables can be
used as a basis for creating these custom channel tables. Refer to the
CSS 150 SignalScout Software User Manual for instructions. Another
way of setting up channel tables is to “clone” the configuration of
another RFM 150.
This appendix section defines the eleven fixed channel tables. The
information given above each table represents data that is the same
for every channel in that table. This includes the defaults for the four
editable fields. Blanks are provided to fill in new values when the
fields are edited. A blank table appears at the end of the section, to
allow for custom channel tables.
RFM 150 Instruction Manual A–1
Appendix A: Channel Tables
The RFM 150 contains eleven fixed channel tables, which can be
edited, but cannot be deleted. The four fields that can be edited
through the RFM 150 menus are: skip (yes/no), scrambled (yes/no),
dwell time (short or long) and amplitude offset (in dB). The
companion CSS150 package allows editing of additional fields, as
well as the creation of custom channel tables. Fixed tables can be
used as a basis for creating these custom channel tables. Refer to the
CSS 150 SignalScout Software User Manual for instructions. Another
way of setting up channel tables is to “clone” the configuration of
another RFM 150.
This appendix section defines the eleven fixed channel tables. The
information given above each table represents data that is the same
for every channel in that table. This includes the defaults for the four
editable fields. Blanks are provided to fill in new values when the
fields are edited. A blank table appears at the end of the section, to
allow for custom channel tables.