Tektronix RFM150, Instruction Manual

Page: 112 / 278

Reference
3–18 RFM 150 Instruction Manual
Error Messages
In order to properly print a measurement result, the channel table
that was used when the measurement was stored must still be present
in the instrument when the result is printed. If the channel table has
been deleted, an error message will be generated when the report is
printed. If the fixed portion of the channel table has been changed
since the measurement was stored, an error message will be
generated. The report will be printed; however, the errors could
result in blank fields or an incorrect measurement type report.
If the RFM 150 is not connected to a printer when PRINT or PRINT
ALL is selected, and CTS/RTS handshaking is selected, the
instrument will display the print message. To clear this message,
select ABORT PRINT and YES.
Reference
3–18 RFM 150 Instruction Manual
Error Messages
In order to properly print a measurement result, the channel table
that was used when the measurement was stored must still be present
in the instrument when the result is printed. If the channel table has
been deleted, an error message will be generated when the report is
printed. If the fixed portion of the channel table has been changed
since the measurement was stored, an error message will be
generated. The report will be printed; however, the errors could
result in blank fields or an incorrect measurement type report.
If the RFM 150 is not connected to a printer when PRINT or PRINT
ALL is selected, and CTS/RTS handshaking is selected, the
instrument will display the print message. To clear this message,
select ABORT PRINT and YES.