Tektronix RFM150, Instruction Manual, Page: 116 / 278

Reference
3–22 RFM 150 Instruction Manual
Site Name
The results of measurements made with the RFM 150 can be stored
in the internal non-volatile memory. The active site name is attached
to results as they are stored.
Selecting the active site name. Press STORE, then select SITE
NAME. A list of site names will be displayed (Figure 3–9). Use the
knob to select the site name to become active, then select MAKE
ACTIVE. The new active site name appears above the list.
Entering site name.
Press STORE, then select SITE NAME. If
entering a new site name, select NEW SITE now. If editing an
existing site name, use the knob to select the name to be edited, then
select EDIT NAME.
SITE # SITE NAME
1 SITE A
2 SITE B
3 SITE C
4 HEADEND 1
5 HEADEND 2
6 1578 CEDAR STREET
7 13520 NW DOUGLAS STREET
8 12750 SW ELM AVENUE
Outline cursor indicates
selected site name.
This site name will be
acted upon when any of
the five function keys
are pressed.
SITE NAME MENU 1 sts
ACTIVE NAME: SITE_A
MAKE
ACTIVE EDIT
NAME
NEW
SITE
DEL DEL
ALL
Function keys
Active site name. This
will be replaced with
SITE C if MAKE ACTIVE
is selected.
Figure 3–9: Site name menu
After selecting either EDIT NAME or NEW SITE, an underscore
cursor appears. Enter the desired site name. A site name can contain
numbers and letters, up to 20 characters. New site names are added
to the end of the list of site names. The number of site names that
can be stored is limited only by the amount of available non-volatile
memory.
Reference
3–22 RFM 150 Instruction Manual
Site Name
The results of measurements made with the RFM 150 can be stored
in the internal non-volatile memory. The active site name is attached
to results as they are stored.
Selecting the active site name. Press STORE, then select SITE
NAME. A list of site names will be displayed (Figure 3–9). Use the
knob to select the site name to become active, then select MAKE
ACTIVE. The new active site name appears above the list.
Entering site name.
Press STORE, then select SITE NAME. If
entering a new site name, select NEW SITE now. If editing an
existing site name, use the knob to select the name to be edited, then
select EDIT NAME.
SITE # SITE NAME
1 SITE A
2 SITE B
3 SITE C
4 HEADEND 1
5 HEADEND 2
6 1578 CEDAR STREET
7 13520 NW DOUGLAS STREET
8 12750 SW ELM AVENUE
Outline cursor indicates
selected site name.
This site name will be
acted upon when any of
the five function keys
are pressed.
SITE NAME MENU 1 sts
ACTIVE NAME: SITE_A
MAKE
ACTIVE EDIT
NAME
NEW
SITE
DEL DEL
ALL
Function keys
Active site name. This
will be replaced with
SITE C if MAKE ACTIVE
is selected.
Figure 3–9: Site name menu
After selecting either EDIT NAME or NEW SITE, an underscore
cursor appears. Enter the desired site name. A site name can contain
numbers and letters, up to 20 characters. New site names are added
to the end of the list of site names. The number of site names that
can be stored is limited only by the amount of available non-volatile
memory.