Tektronix RFM150, Instruction Manual

Page: 274 / 278

Index
Index–4 RFM 150 Instruction Manual
Minute setting (MINUTE), 3–6
N
NOW, 2–38
Numeric keypad, 2–2
NVRAM upgrade, 1–3
O
Offset, 1–19
Option 01, 1–3
Optional accessories, 1–4
Options, 1–3
OVER, 1–15, 2–26
P
Parts list, 7–1
Peak detection (PEAK), 1–14,
2–29, 2–40
Performance check, 5–1
Pilots, 1–19
Pilots mode, 1–8, 2–20
Pin assignments, B–2
Power, 3–11
POWER key, 2–4
Power key, 3–11
Power plug options, 1–3
Power units, 1–18, 2–26, 3–28
Power up/power down mode (PWR
UP/DN), 3–13
Presets, 2–10, 3–14
Press-and-hold programming, 3–16
PRINT, 3–25
Print
error message, 3–18
hookup, B–6
interface configuration, 1–20,
B–5
menu selections, 3–25
reference, 3–17
report formats, C–1
report samples, C–1
tutorial, 1–22
PRINT ALL, 3–26
Printer requirements, B–5
Probe loss, 1–18, 1–19
Probe loss (PROBE LOSS),
3–19–3–28
Programming the presets, 3–16
PWR UP/DN, 1–18
R
Readouts, 2–8
Recharging the battery, 6–19
REF, 1–15
REF LVL, 1–9, 2–23
Reference information, 3–1
Reference level, 1–15, 2–23, 2–26,
2–28
Reference level (REF), 1–8, 1–9,
2–40
Remote communications, 5–11
Remote connector, 2–1, B–1
Remote/local operation, 2–9
Repeat times for sequence (RE-
PEAT TIMES), 2–38
Replacing
the Back Board circuit board
assembly, 6–11
the encoder, 6–6
the Front Panel circuit board
assembly, 6–6
the keypads, 6–6
the LCD Display mode, 6–9
the speaker, 6–6
Replacing the battery, 6–13
Replacing the Calibrated Board
Set, 6–4
Index
Index–4 RFM 150 Instruction Manual
Minute setting (MINUTE), 3–6
N
NOW, 2–38
Numeric keypad, 2–2
NVRAM upgrade, 1–3
O
Offset, 1–19
Option 01, 1–3
Optional accessories, 1–4
Options, 1–3
OVER, 1–15, 2–26
P
Parts list, 7–1
Peak detection (PEAK), 1–14,
2–29, 2–40
Performance check, 5–1
Pilots, 1–19
Pilots mode, 1–8, 2–20
Pin assignments, B–2
Power, 3–11
POWER key, 2–4
Power key, 3–11
Power plug options, 1–3
Power units, 1–18, 2–26, 3–28
Power up/power down mode (PWR
UP/DN), 3–13
Presets, 2–10, 3–14
Press-and-hold programming, 3–16
PRINT, 3–25
Print
error message, 3–18
hookup, B–6
interface configuration, 1–20,
B–5
menu selections, 3–25
reference, 3–17
report formats, C–1
report samples, C–1
tutorial, 1–22
PRINT ALL, 3–26
Printer requirements, B–5
Probe loss, 1–18, 1–19
Probe loss (PROBE LOSS),
3–19–3–28
Programming the presets, 3–16
PWR UP/DN, 1–18
R
Readouts, 2–8
Recharging the battery, 6–19
REF, 1–15
REF LVL, 1–9, 2–23
Reference information, 3–1
Reference level, 1–15, 2–23, 2–26,
2–28
Reference level (REF), 1–8, 1–9,
2–40
Remote communications, 5–11
Remote connector, 2–1, B–1
Remote/local operation, 2–9
Repeat times for sequence (RE-
PEAT TIMES), 2–38
Replacing
the Back Board circuit board
assembly, 6–11
the encoder, 6–6
the Front Panel circuit board
assembly, 6–6
the keypads, 6–6
the LCD Display mode, 6–9
the speaker, 6–6
Replacing the battery, 6–13
Replacing the Calibrated Board
Set, 6–4