Tektronix RFM150, Instruction Manual, Page: 44 / 278

Tutorial
1–22 RFM 150 Instruction Manual
8. Enable auto power down
Turn the RFM 150 power off, then on again. The instrument will
initialize with the auto power down feature enabled.
R. Printing Stored Measurement Results
Stored measurement results can be printed directly from an RFM 150
to a printer (as well as through the CSS150). To print a report
directly to a printer, proceed as follows:
1. Connect the RFM 150 to an appropriate printer. (Refer to
Appendix B, page B–5.) You should already have configured
your printer parameters in step Q of this procedure.
2. Make a 1 Channel measurement.
3. Press STORE, then press F1 (STORE RSLT).
4. Press F2 (RSLTS MENU). A list of the stored results will be
displayed.
5. Use the knob to select the 1 Channel measurement.
6. Press F2 (PRINT). You should see a message screen stating that
the print job is in process. To stop the print job, press F5
(ABORT).
7. The printed report should resemble Figure 1–5.
+-%, /) " %
/
#, $,*('#.
"' 0
#+-% & (!!+ ,
-*% 0
Figure 1–5: Printout of 1 Channel measurement
Tutorial
1–22 RFM 150 Instruction Manual
8. Enable auto power down
Turn the RFM 150 power off, then on again. The instrument will
initialize with the auto power down feature enabled.
R. Printing Stored Measurement Results
Stored measurement results can be printed directly from an RFM 150
to a printer (as well as through the CSS150). To print a report
directly to a printer, proceed as follows:
1. Connect the RFM 150 to an appropriate printer. (Refer to
Appendix B, page B–5.) You should already have configured
your printer parameters in step Q of this procedure.
2. Make a 1 Channel measurement.
3. Press STORE, then press F1 (STORE RSLT).
4. Press F2 (RSLTS MENU). A list of the stored results will be
displayed.
5. Use the knob to select the 1 Channel measurement.
6. Press F2 (PRINT). You should see a message screen stating that
the print job is in process. To stop the print job, press F5
(ABORT).
7. The printed report should resemble Figure 1–5.
+-%, /) " %
/
#, $,*('#.
"' 0
#+-% & (!!+ ,
-*% 0
Figure 1–5: Printout of 1 Channel measurement