Tektronix RFM150, Instruction Manual

Page: 119 / 278

Reference
RFM 150 Instruction Manual 3–25
If the viewed result is part of a sequence of measurement results,
turning the knob will advance through the sequence, one measure-
ment at a time. Pressing ESC will exit the view screen.
From the view screen, selecting STORED INFO displays additional
information about the stored result, such as the site name and
temperature (Figure 3–11). If the stored result is part of a sequence,
the repetition number is also displayed. Pressing ESC will exit the
additional stored information screen.
Measurement mode
of stored result
Appears only if result
is part of a sequence
Active site name when
result was stored
ADDITIONAL STORED INFO
Result Type: 5 CHAN
Sequence Repetition: 3
16–MAR–94 17:32 44
°
F
Site: 1st and Main Street
F5 Frequency = 1069.25 MHz
F4 Frequency = 1080.00 MHz
F3 Frequency = 05.25 MHz
F2 Frequency = 83.25 MHz
F1 Frequency = 55.25 MHz
Five lines of data that
vary depending on
result type
Date and time the
result was stored
Press ESC to Exit
Ch Tbl: 5 CHAN
Temperature stored in RFM 150
at time of measurement
Figure 3–11: Additional information screen for 5 channel measurement type
Print a stored measurement result. Press STORE and select
RSLTS MENU. A list of all stored measurement results will be
displayed (Figure 3–10). Use the knob to highlight the desired
measurement result. To scroll the list, turn the knob.
Press F2 (PRINT) to print the selected measurement result. While the
result is printing, a print in progress message is displayed, as shown
in Figure 3–12. To stop the print job, press ABORT PRINT and
select YES.
General reference information about printing appears on page 3–17.
Reference
RFM 150 Instruction Manual 3–25
If the viewed result is part of a sequence of measurement results,
turning the knob will advance through the sequence, one measure-
ment at a time. Pressing ESC will exit the view screen.
From the view screen, selecting STORED INFO displays additional
information about the stored result, such as the site name and
temperature (Figure 3–11). If the stored result is part of a sequence,
the repetition number is also displayed. Pressing ESC will exit the
additional stored information screen.
Measurement mode
of stored result
Appears only if result
is part of a sequence
Active site name when
result was stored
ADDITIONAL STORED INFO
Result Type: 5 CHAN
Sequence Repetition: 3
16–MAR–94 17:32 44
°
F
Site: 1st and Main Street
F5 Frequency = 1069.25 MHz
F4 Frequency = 1080.00 MHz
F3 Frequency = 05.25 MHz
F2 Frequency = 83.25 MHz
F1 Frequency = 55.25 MHz
Five lines of data that
vary depending on
result type
Date and time the
result was stored
Press ESC to Exit
Ch Tbl: 5 CHAN
Temperature stored in RFM 150
at time of measurement
Figure 3–11: Additional information screen for 5 channel measurement type
Print a stored measurement result. Press STORE and select
RSLTS MENU. A list of all stored measurement results will be
displayed (Figure 3–10). Use the knob to highlight the desired
measurement result. To scroll the list, turn the knob.
Press F2 (PRINT) to print the selected measurement result. While the
result is printing, a print in progress message is displayed, as shown
in Figure 3–12. To stop the print job, press ABORT PRINT and
select YES.
General reference information about printing appears on page 3–17.