Tektronix RFM150, Instruction Manual

Page: 250 / 278

Appendix B: Remote Communications
B–6 RFM 150 Instruction Manual
4. After all fields have been edited, press ESC to exit the menu, one
level at a time. The new settings will be saved.
The RFM 150 will automatically use these printer settings when a
print job is active. (If no print job is active, the RFM 150
communication mode is determined by the RS232 menu settings.)
BAUD RATE: 300 1200 2400
4800 9600
"
PRINTER MENU
BAUD
RATE
PARITY FLOW
CNTRL
PARITY: EVEN ODD NONE
FLOW CONTROL: NONE XON / XOFF CTS/RTS
Figure B–4: RS232 menu showing factory settings
Hookup
Connect the supplied 9 pin RS-232 cable between the RFM 150
Interface port and the printer port. If your printer has a 25-pin serial
port, use a 9-pin to 25-pin adapter. Pin assignments are shown in
Table B–1, and the connector location is shown in Figure B–2.
Printing Stored Results
Instructions for printing stored results are given in the Tutorial on
page 1–22. More information about the print function appears in the
Reference section, on pages 3–17 and 3–25.
Appendix B: Remote Communications
B–6 RFM 150 Instruction Manual
4. After all fields have been edited, press ESC to exit the menu, one
level at a time. The new settings will be saved.
The RFM 150 will automatically use these printer settings when a
print job is active. (If no print job is active, the RFM 150
communication mode is determined by the RS232 menu settings.)
BAUD RATE: 300 1200 2400
4800 9600
"
PRINTER MENU
BAUD
RATE
PARITY FLOW
CNTRL
PARITY: EVEN ODD NONE
FLOW CONTROL: NONE XON / XOFF CTS/RTS
Figure B–4: RS232 menu showing factory settings
Hookup
Connect the supplied 9 pin RS-232 cable between the RFM 150
Interface port and the printer port. If your printer has a 25-pin serial
port, use a 9-pin to 25-pin adapter. Pin assignments are shown in
Table B–1, and the connector location is shown in Figure B–2.
Printing Stored Results
Instructions for printing stored results are given in the Tutorial on
page 1–22. More information about the print function appears in the
Reference section, on pages 3–17 and 3–25.