1-10
Phaser 480 Color Printer
1
General Information
You must toggle Switch 1
on
and
off
to reset the printer and enable most switch
changes (Switches 8 and 9 are acted upon immediately). Alternatively, turning
the printer off for 10 seconds and then powering it on again also resets the
printer and enables the new DIP switch setting.
Front panel
The front panel consists of seven LEDs indicating the printer's normal operating
status.
POWER:
Illuminates to indicate that the power supply is gene5 VDC.
READY:
On
indicates the printer is idle.
Blinking
indicates the printer is
receiving and processing data.
Off
indicates that the printer is not ready, not
working, or there is an error.
COVER:
On
indicates the top cover is open.
TRANSFER ROLL:
On
blinking indicates the transfer roll is empty and must be
replaced.
MEDIA:
On
blinking indicates that the paper tray is empty.
JAM:
On
indicates a jam has occurred inside the printer.
ERROR:
On
indicates a hardware engine error has occurred.
Figure 1-8. The front panel
8850-08
ERROR
JAM
MEDIA
TRANSFER
ROLL
COVER
READY
POWER
