7-4
Phaser 480 Color Printer
7
Cleaning and Maintenance
h.
On the rear panel of the printer, set
Switch 6
to the
up
position.
(A diagram of the switch settings appears on the back panel with
the switches.)
i.
Set
Switch 1
to the
up
position, then to the
down
position.
Wait for the motor noises to stop.
j.
Toggle
Switch 1
up
, then
down
three more times.
Note
Always
wait for the motor noises to stop before toggling
Switch 1
.
k.
Reset the switches: set
Switch 6
to the
down
position;
set
Switch 1
to the
up
position, then to the
down
position.
l.
Remove the cleaning sheet from the paper tray and put it away (it
can be used up to 12 times). Wipe out any excess alcohol from
inside the tray before refilling it with paper. Put the paper tray
back into the printer.
3.
Thermal Head
Open the cover to its full upright position.
Caution
Do not force the cover open; you could damage the printer. If the
cover is only partially opened, a safety catch keeps the cover from
releasing. Slide the cover release again and then raise the cover.
Note
After making the last print, allow the thermal head to cool at least 5
minutes before cleaning because it is very hot.
LocalTalk®
Serial
(RS-232)
Parallel
Reset
Extended
Power Up
Run
Variable
1
2
3
4
5
6
7
8 9
Diagnostics
1200
Baud Rate
Skip
Run
Startjob
*
*
*
*See User Manual
*
9237-18
2h
1
2
3
4
5
6
7
8
9
