Service Manual
2-19
Installing the Printer and Drivers
2
Syslog
Protocol that acts as a remote front
panel to the printer
yes
Not Authorized, <null string>
Log Hosts
List of address of host that want to
receive syslog messages
yes
Send no
messages
List of IP addresses in the
format N.N.N.N
Log Priority
The threshold indicating the priority
level of messages from the printer that
will be sent to the list of log host(s)
yes
5
0 – unit is no longer usable, 1
– messages indicating action
is needed on part of system
admin, 2 – critical error
messages, 3 – error
message, 4 – warning
messages, 5 – normal but
significant message, 6 –
informational messages, 7 –
debugging messages
SNMP
Allow the printer to respond to status
queries from host-resident SNMP
utilities
yes
Not Authorized, <null string>
System name
printer name
yes
Phaser 480
String of 0 to 255 characters
System contact
name and phone number or address of
person responsible for the printer
yes
String of 0 to 255 characters
System location
location of the printer
yes
String of 0 to 255 characters
Trap Hosts
A list of hosts, one for each protocol,
which are able to receive traps.
yes
None
None, N.N.N.N/Public,
N.N.N.N/Proxy,
N.N.N.N/Private,
N.N.N.N/Regional,
N.N.N.N/Core
Private Hosts
A single node address per protocol of
a host which is able to set SNMP
variables
yes
None
List of IP addresses of the
form N.N.N.N
Authentication
Failure Traps
If enabled, the printer sends a trap for
SNMP authentication failure
yes
Enabled
Disabled
SCSI Disk
Indicates if a SCSI disk is attached to
the printer. Also indicates its storage
capacity and the amount of free space
Not connected
Online,
total space, free
space
Execute
Sys/Start Job
Determine whether or not to run the
system start file during system
initiation
Yes
Run
Skip
Boot Delay
Number of seconds the printer waits
before booting up the attached hard
dive
Yes
0
Any positive integer
Check parity
If true, data parity should be checked
False
True
Disk Address
SCSI address of disk for the SCSI
communication channel
No
6
0 to 7
Printer address
SCSI address of printer when it is the
initiator
No
7
0 to 7
Table 2-1. Configuration page settings for the Phaser 480
Parameter
Description
Saved
in
NVRAM
Default
Limits or alternate choices
