Using the Menus
3Ć22
MTX100 MPEG Recorder & Player User Manual
Menus in the Record Screen
This subsection describes the menus available in the Record screen.
The File menu in the Record screen contains commands for setting the save
mode and for saving and loading a preset file. This menu also contains com-
mands for exiting the MTX100 application and for shutdown of the instrument.
Table 3-11 describes the commands in the File menu.
Table 3Ć11: File menu commands (Record screen)
Command
Description
Save
Specifies the file name used when you save a stream data. When you
select this command, the Save as dialog box appears. In default, the
current data (yymmdd) is used as a file name.
Save Mode
Sets the save mode when you save a stream data. You can select Over
Write or New File. In the Over Write mode, the existing file is over
written by the new file with the name specified in the Save command
whenever you save a stream data. In the New File mode, a new file is
created whenever you save a stream file. The file name is the following:
the name specified by the Save co # (1,2,3,4...).
Load Preset
Loads the specified preset file (*.set). When a preset file is loaded, the
current instrument settings are changed by the file's content. Refer to
beginning on page 3Ć51, for more information about the
preset file.
Save Preset
Saves the current instrument settings as a preset file. Refer to
beginning on page 3Ć51, for more information about the preset file.
PLAY
Switches to the Play screen.
Minimize
Minimizes the MTX100 application window.
Exit
Quits the MTX100 application. The MTX100 application settings are
saved.
Shutdown
Quits the MTX100 application and shuts down the MTX100.
The View menu contains commands that control the display of the Toolbar and
Status bar. The View menu in the Record screen is the same as that in the Play
screen. Refer to Table 3-2 on page 3-5 for the commands available in the View
menu.
The Record menu contains commands for setting the input interface, record size,
trigger position, and target source. Table 3-12 describes the commands in the
Record menu.
File Menu
ViewMenu
Record Menu
Summary of Contents for MTX100
