Remote Commands
MTX100 MPEG Recorder & Player User Manual
:PLAY:PCR:INITial <numeric_value>,<numeric_value>
Sets the initial value of the program_clock_reference_base and
program_clock_reference_extension parameters. You can set the
program_clock_reference_base value from 0 to 8589934591 and set
the program_clock_reference_extension value from 0 to 299. The
default values are both 0.
:PLAY:PCR:INITial?
Returns the current initial value of the program_clock_refer-
ence_base and program_clock_reference_extension parameters.
:PLAY:PCR:INACcuracy NONE|SINe|SQUare|TRIangle|PULSe|SAW|
RANDom|OFFSet[,<PID>,<amplitude>
[<period>[,<pulse_width>]]];
Sets the PCR jitter insertion. Use the first argument to set the
waveform type used to add jitter. When NONE is selected, the jitter
insertion is disabled. Use the second to fifth arguments to set the
PID of the PCRs, the amplitude of the waveform, the period of the
waveform, and pulse width of the waveform. The pulse width is
available only when the waveform is set to PULSe. The ranges of
each argument are as follows:
PID: 0 to 8191
Amplitude: 0 to 135000000
Period: 5 to 3000
Pulse width: 1 to (period –1)
:PLAY:PCR:INACcurracy?
Returns the current PCR jitter insertion settings.
:PLAY:SOURce RAM|DISK
Sets the source for stream output. The choices are RAM (system
RAM) or DISK (hard disk). The default value is DISK.
:PLAY:SOURce?
Returns the current source setting for stream output.
:PLAY:SPIOutput ON|OFF
Sets whether the signal output from the SPI IN/OUT connector is
enabled or not. You can use 1 or 0 instead of ON or OFF. The
default value is ON.
:PLAY:SPIOutput?
Returns the current output status of the SPI IN/OUT connector.
Summary of Contents for MTX100
