Tektronix MTX100, User Manual

Page: 173 / 254

Using the IEEE1394 Interface (Option 05 Only)
MTX100 MPEG Recorder & Player User Manual
3Ć113
5. Select the D-VHS recorder from the Instrument list box, and then click the
Connect button. If necessary, check the to Tuner check box.
If the connected IEEE1394 device can operate the other device remotely,
check the to Tuner check box since the connection setting may be made by
the IEEE1394 device (the MTX100 Option 05 cannot be operated remotely
from the device).
6. Click the OK button.
7. Select the Open command from the File menu to open the Select File dialog
box.
. Some devices may be required the SI information such as SIT or NIT
when decoding the TS file.
8. In the dialog box, select the transport stream file you want to output.
9. Press the PLAY button on the MTX100 Option 05 to output the transport
stream.
10. If you want to record the transport stream, press the Record button on the
D-VHS recorder.
1. Use an IEEE1394 cable to connect the IEEE1394 connector on the MTX100
Option 05 and the IEEE1394 connector on the D-VHS recorder.
2. In the device connection menu of the D-VHS recorder, select the MTX100
Option 05. Refer to the instruction manual attached with the D-VHS recorder
for the device connection menu.
3. Press the REC button on the MTX100 Option 05 to display the Record
screen.
4. Select ASI/1394 from the Source command in the Record menu.
5. Select 1394 from the Input Port command in the ASI/1394 menu.
6. Select PtoP Connect from 1394 Mode command in the ASI/1394 menu, or
click PtoP Connect button on the toolbar. The IEEE1394 dialog box
appears.
7. Select the D-VHS recorder from the Instrument list box, and then click the
Connect button.
8. Click the OK button.
Receiving a transport
stream from the DĆVHS
Recorder