Using the IEEE1394 Interface (Option 05 Only)
3Ć118
MTX100 MPEG Recorder & Player User Manual
About the Partial Transport Stream
The partial transport stream is a bit stream used for data transmission in
IEEE1394 interface. Unlike the MPEG-2 transport stream, the partial transport
stream has a time code of 4 bytes after each transport stream packet of 188 bytes
(see Figure 3-36). The time code provides the interval between the sync byte of a
packet and the sync byte of the next packet in 27 MHz resolution.
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
Figure 3Ć36: Partial transport stream
In the MTX100 Option 05, a captured transport stream can be recorded as a
partial transport stream by setting the Partial TS command in the ASI/1394 menu
to On.
The packet size of the recorded file in the partial transport stream format is fixed
in 192 bytes. When you open the file, the Partial TS letters are displayed in the
status bar.
The following are notes for recording or playing a partial transport stream:
Be sure to record a partial transport stream using the partial transport stream
format. Doing not so, the packet interval is not reproduced when the
transport stream is played.
The partial transport stream with any packet interval more than 600 ms
cannot be recorded correctly as a partial transport stream.
A transport stream is not output from the SPI connector while a partial
transport stream is played.
Summary of Contents for MTX100
