Remote Commands
3Ć90
MTX100 MPEG Recorder & Player User Manual
:SYSTem:STANdard MPEG|ARIB|ATSC|DVB
Sets the standard used to display the input stream. The choices are
MPEG, ARIB, ATSC, or DVB. The default value is ARIB.
:SYSTem:STANdard?
Returns the current standard used to display the input stream.
:SYSTem:STATus?
Returns the current operation status of the instrument. The available
responses are:
0: the instrument stops any operations
1: the instrument is outputing a data
2: the instrument is acquiring a data
3: the instrument is recording a data
Optional Commands
This subsection describes the commands used to control the optional interface
cards. These commands are available only when the appropriate interface card is
installed into the MTX100.
:PLAY:ASI:FORMat BYTE|PACKet
Sets the output format of the ASI signal. The choices are BYTE or
PACKet. For BYTE, valid data is output using a burst transmission
mode. For PACKet, valid data is output in each transport stream
packet. The default value is PACKet.
:PLAY:ASI:FORMat?
Returns the current output format setting of the ASI signal.
:PLAY:ASI:THROughout ON|OFF
Sets the throughout mode; whether the signal applied to the ASI IN
connector is output from the ASI OUT connector when a stream is
not output. You can use 1 or 0 instead of ON or OFF. This setting
changes the :RECord:ASI:THROughout command setting. The
default value is ON.
Option 01 ASI Interface
Summary of Contents for MTX100
