Using the Menus
3Ć18
MTX100 MPEG Recorder & Player User Manual
The ASI/1394 menu is displayed when the IEEE1394/ASI interface option is
installed. This menu contains commands for setting an output format of the ASI
signal and the operation mode for the IEEE1394 interface. Table 3-8 describes
the commands available in the ASI/1394 menu.
Table 3Ć8: ASI/1394 menu commands (Play screen)Ă
Command
Description
ASI Format
Sets the output format of the ASI signal. You can select Byte or Packet.
For Byte, valid data is output using a burst transmission mode. For
Packet, valid data is output in each transport stream packet.
1394 Mode
Sets connection mode when using the IEEE1394 interface. You can
select only PtoP Connect (pointĆtoĆpoint connection) in this version.
When you select PtoP Connect, the IEEE1394 dialog box appears.
Refer to
on page 3Ć18 for more information.
Bus Reset
Performs software resetting for the IEEE1394 bus. Use this command to
reset the connection when the MTX100 Option 05 does not recognize an
IEEE1394 device or when an IEEE1394 device does not recognize the
MTX100 Option 05.
NOTE
: If you reset the IEEE1394 bus while the MTX100 Option 05
sends or receives data, the operation is stopped. In addition, the
IEEE1394 connection is terminated.
IEEE1394 DialogBox.
When you select the PtoP Connect from the 1394 Mode
command in the ASI/1394 menu, the IEEE1394 dialog box appears as shown in
Figure 3-8.
Figure 3Ć8: IEEE1394 dialog box (Play screen)
ASI/1394 Menu (Option 05
Only)
Summary of Contents for MTX100
