Tektronix MTX100, User Manual

Page: 139 / 254

Remote Commands
MTX100 MPEG Recorder & Player User Manual
:PLAY:CLOCk:SOURce INTernal|EXT10M|EXT27M|EXTIfft|EXTParallel|
EXTSerial
Sets which clock to use as the reference for the stream output. The
choices are:
INTernal: uses the internal clock.
EXT10M: uses a 10 MHz signal on the CLK/REF IN connector.
EXT27M: uses a 27 MHz signal on the CLK/REF IN connector.
EXTIfft: uses an IFFT sample clock signal (8.126984 MHz) on the
CLK/REF IN connector.
EXTParallel: uses a clock signal on the CLK/REF IN connector as a
parallel clock.
EXTSerial: uses a clock signal on the CLK/REF IN connector as a
serial clock.
:PLAY:CLOCk:SOURce?
Returns the current reference clock for the stream output.
:PLAY:LOAD:FILE <file_name>
Loads the specified stream file.
:PLAY:LOAD:FILE?
Returns the name of the file currently loaded.
:PLAY:LOOP ON|OFF
Sets whether or not the selected stream is output using looping
method. When you set it to ON, the stream is continuously output.
The default value is ON.
:PLAY:LOOP?
Returns the current output loop mode status.
:PLAY:PACKet 188|204|208|NONTs
Sets the packet size for the selected stream file. The choices are 188,
204, 208, or NONTs (Non TS). The default value is 188.
:PLAY:PACKet?
Returns the current packet size setting for the selected stream file.