Using the Menus
MTX100 MPEG Recorder & Player User Manual
3Ć27
The BNC I/F menu is displayed when the BNC interface option is installed. This
menu contains commands for setting the input signal level and polarity of the
clock signal. Table 3-15 describes the commands available in the BNC I/F menu.
Table 3Ć15: BNC I/F menu commands (Record screen)Ă
Command
Description
Level
Sets the signal level applied to the BNC interface. You can select TTL or
ECL.
Refer to
for more detailed electrical
characteristics.
Clock
Sets the polarity of the signal applied to the CLOCK connector. You can
select Rise or Fall.
Use Psync
Sets whether or not the PSYNC signal is used for serial input. You can
select On or Off. When you set it to On, the MSB is determined from the
PSYNC signal. When you set it to Off, the MSB is determined from the
bit pattern of the sync byte.
The DHEI I/F menu is displayed when the DHEI interface option is installed.
This menu contains commands for setting the status between input and output.
Table 3-16 describes the commands available in the DHEI I/F menu.
Table 3Ć16: DHEI I/F menu command (Record screen)Ă
Command
Description
Input Port
Sets the connecter used to input a stream data. You can select
Expansion In (EXPANSION IN) or Expansion Out (EXPANSION OUT).
Through Out
Sets whether the signal supplied to the EXPANSION IN (OUT)
connector is output from the EXPANSION OUT (IN) connector. You can
select On or Off.
BNC I/F Menu (Option 03
Only)
DHEI I/F Menu (Option 04
Only)
Summary of Contents for MTX100
