Using the Menus
3Ć30
MTX100 MPEG Recorder & Player User Manual
Press the ENTER button on the front panel to enable all the settings and to
close the dialog box.
When Probe is selected:
Source: Select the IEEE1394 device for the source.
Press the TAB button repeatedly to select the list box, and then press the
arrow buttons to select the instrument.
Destination: Select the IEEE1394 device for the destination.
Press the TAB button repeatedly to select the list box, and then press the
arrow buttons to select the instrument.
Press the ENTER button on the front panel to enable all the settings and to
close the dialog box.
Refer to Using the IEEE1394 Interface (Option 05 only) on page 3-111 for
detailed information on how to connect the MTX100 Option 05 and an
IEEE1394 device(s), and how to set up the MTX100 Option 05 when using the
PtoP Connect and Probe modes.
The ASI/310M menu is displayed when the SMPTE310M/ASI interface option
is installed. This menu contains a command for setting an input signal.
Table 3-18 describes the command available in the ASI/310M menu.
Table 3Ć18: ASI/310M menu command (Record screen)Ă
Command
Description
Port
Sets the input signal expected from the INPUT connector. You can
select ASI or 310MĂ8VSB (SMPTE310M signal with data rate of 8VSB).
The Utility menu contains commands for displaying the system information such
as software and hardware versions. The Utility menu in the Record screen is the
same as that of the Play screen. Refer to Table 3-10 on page 3-20 for detailed
information.
ASI/310M Menu (Option 06
Only)
UtilityĂMenu
Summary of Contents for MTX100
