Using the Menus
3Ć26
MTX100 MPEG Recorder & Player User Manual
SPI Output Enable: This item cannot be accessed from the Record screen.
Refer to SPI Output Enable on page 3-14 for detailed information.
Press the ENTER button to enable all setting changes.
The ASI I/F menu is displayed when the ASI interface option is installed. This
menu contains command for setting the input status. Table 3-13 describes the
command available in the ASI I/F menu.
Table 3Ć13: ASI I/F menu command (Record screen)Ă
Command
Description
Through Out
Sets whether the signal applied to the ASI IN connector is output from
the ASI OUT connector when a stream is not output. You can select On
or Off.
The Univ I/F menu is displayed when the universal parallel/serial interface
option is installed. This menu contains commands for setting the input status
such as output signal level, output format, and polarity of the EVENT signal.
Table 3-14 describes the commands available in the Univ I/F menu.
Table 3Ć14: Univ I/F menu commands (Record screen)Ă
Command
Description
Level
Sets the signal level applied to the UNIVERSAL IN/OUT connector. You
can select TTL, ECL, or LVDS.
Refer to
for more detailed electrical
characteristics.
Format
Sets the signal format applied to the UNIVERSAL IN/OUT connector.
You can select Parallel or Serial.
Clock
Sets the polarity of the input clock signal. You can select Rise or Fall.
Use Psync
Sets whether or not the PSYNC signal is used for serial input. You can
select On or Off. When you set it to On, the MSB is determined from the
PSYNC signal. When you set it to Off, the MSB is determined from the
bit pattern of the sync byte.
Receive
Sets the input mode for the parallel interface. You can select Differential
or Single End.
Termination
Sets the internal termination either On or Off. When you have selected
Single End from the Receive command, you cannot select Off.
ASI I/F Menu (Option 01
Only)
Univ I/F Menu (Option 02
Only)
Summary of Contents for MTX100
