MTX100 MPEG Recorder & Player User Manual
3Ć111
Using the IEEE1394 Interface (Option 05 Only)
The IEEE1394 interface of the MTX100 Option 05 allows you to send and
receive a transport stream from an IEEE1394 devices, and to capture a transport
stream transmitting between two IEEE1394 devices using the following three
modes:
Point-to-point connection
Data probing
ASI/IEEE1394 input/output conversion
This section explains how to connect the MTX100 Option 05 and an IEEE1394
device(s), and how to set up the MTX100 Option 05 when using these modes.
This section assumes that a key board and mouse are connected to the MTX100
Option 05.
Refer to Using the Menu beginning on page 3-3 for detailed information about
menus and dialog boxes related to the IEEE1394 interface settings.
. The MTX100 Option 05 does not support the copy protection feature by
DTCP (Digital Transmission Control Protection). Therefore, you cannot record
or play copy-guarded data using the IEEE1394 interface.
Note for Connections
When you connect the MTX100 Option 05 to an IEEE1394 device(s) such as a
BS/CS tuner or a D-VHS recorder, note the following:
To prevent possible damage to the MTX100 Option 05, do not use a
damaged IEEE1394 cable for connection.
Connect an IEEE1394 cable to the MTX100 Option 05 after power on.
If you power on the instrument with the IEEE1394 cable connected, it takes
about 10 to 30 seconds for the instrument to enable the menu operation.
Power on the MTX100 Option 05 first, and then power on an IEEE1394
device(s).
Summary of Contents for MTX100
