Connecting to a Network
MTX100 MPEG Recorder & Player User Manual
3Ć59
. Under some network environments, the MTX100 may not be able to
obtain the IP address automatically from a DHCP server. In this case, you need
to enter the appropriate address value in each submenu item.
When the DHCP Server is not in the Network.
When the DHCP server is not in the network, perform the following procedure to
set the network parameters.
1. If you connect the MTX100 directory to a single PC:
a. In the dialog box, select the Use the following IP address check box.
b. Set the IP address parameter to be the same IP address as the PC’s
address except for the last number. The last number must be different
than the last number in the PC’s IP address.
c.
Set the Subnet mask parameter to be the same net mask (subnet mask)
used by the PC. Do not enter a number if the PC does not have a net
mask.
d. You do not need to enter a Default gateway if you are directly connected
to a single PC.
2. If you connect the MTX100 to your local Ethernet network:
a. In the dialog box, select the Use the following IP address check box.
b. Ask your local network administrator and set the appropriate addresses.
To prevent communication conflicts on your Ethernet network, ask
your local network administrator for the correct numbers to enter in the dialog
box if you connect the MTX100 to your local Ethernet network.
3. Verify the Ethernet connection by using a ping command from the PC.
Summary of Contents for MTX100
