Remote Commands
MTX100 MPEG Recorder & Player User Manual
:RECord:BNCserial:CLOCk RISE|FALL
Sets the input clock edge of the BNC serial interface. The choices
are RISE (rising edge) or FALL (falling edge). This setting changes
the :PLAY:BNCserial:CLOCk command setting. The default value is
RISE.
:RECord:BNCserial:CLOCk?
Returns the current input clock edge setting of the BNC serial
interface.
:RECord:BNCserial:LEVEl ECL|TTL
Sets the input level of the BNC serial interface. The choices are ECL
or TTL. This setting changes the :PLAY:BNCserial:LEVEl
command setting. The default value is ECL.
:RECord:BNCserial:LEVEl?
Returns the current input level setting of the BNC serial interface.
:RECord:BNCserial:PSYNc ON|OFF
Sets whether or not the PSYNC signal is used for the BNC serial
interface. When you set it to ON, the MSB is determined from the
PSYNC signal. When you set it to OFF, the MSB is determined
from the bit pattern of the sync byte. You can use 1 or 0 instead of
ON or OFF. The default value is ON.
:RECord:BNCserial:PSYNc?
Returns whether or not the PSYNC signal is used for the BNC serial
interface.
:PLAY:DHEI:THROughout ON|OFF
Sets the throughout mode; whether the signal supplied to the
EXPANSION IN (OUT) connector is output from the EXPANSION
OUT (IN) connector when a stream is not output. You can use 1 or 0
instead of ON or OFF. This setting changes the :RE-
Cord:DHEI:THROughout command setting. The default value is
ON.
:PLAY:DHEI:THROughout?
Returns the current throughout mode status when a stream is not
output.
Summary of Contents for MTX100
