Tektronix MTX100, User Manual

Page: 73 / 254

Using the Menus
MTX100 MPEG Recorder & Player User Manual
There are two ways to set the start and stop positions: using the slider (see
Figure 3-6) to set them or using the text boxes to enter values directly.
1. Using the slider:
a. Press the TAB button repeatedly to select the slider. When the slider is
selected, broken lines are showed around it.
b. Press the left (
A
) or right (
"
) arrow button to move the slider to the
place you want to set the start position.
c. Press the TAB button repeatedly to select the Stop option button, and
then press the SELECT button.
This moves the slider to the right end.
d. Press the TAB button repeatedly to select the slider. When the slider is
selected, broken lines are showed around it.
e. Press the left (
A
) or right (
"
) arrow button to move the slider to the
place you want to set the stop position.
f. Press the ENTER button to enable the values.
2. Using the text boxes:
a. Press the TAB button repeatedly to select the Start text box. If you set a
time, select one of the text boxes for setting the hour, minute, or second.
b. Press the SELECT button. The 10 Key Pad appears.
c. Use the 10 Key Pad to enter the value.
d. If you set a time, repeat step a through step c to set the hour, minute, and
second.
e. Use the same procedure given in step a through step d to set the value in
the Stop text box.
f. Press the ENTER button to enable the values.
To reset all of the settings to the values when the dialog box is first
displayed, press the TAB button repeatedly to select the Reset button, and
then press the SELECT button.